Imperial 37007 Imperial 37007 Snap Fastener Standard Screw - 3/8" Pkg/50

Imperial 37007 Snap Fastener Standard Screw - 3/8" Pkg/50 Review

Imperial 37007 Snap Fastener Standard Screw - 3/8" Pkg/50 Feature

• "IMPERIAL" SNAP FASTENER SCREW
• Steel screw stud, 3/8" long.
• Work great for replacing missing snaps on screen or winter fronts.
• Used for securing canvas and fabric.
• Crimp together the snap button and the snap socket to create the female snap fastener.

Imperial 37007 Snap Fastener Standard Screw - 3/8" Pkg/50 Overview

"IMPERIAL" SNAP FASTENER SCREW Steel screw stud, 3/8" long. Work great for replacing missing snaps on screen or winter fronts. Used for securing canvas and fabric. Crimp together the snap button and the snap socket to create the female snap fastener. Crimp together the snap stud and the snap post to create the male snap fastener. Nickel over brass - will not rust. Qauntity: 50 per package.

Mstc Metric Machine Screw Assortment

Metric Machine Screw Assortment Review

Metric Machine Screw Assortment Feature

• Great Variety of Metric Screws - ALL SLOTTED VARIETY
• Multiple head styles (Pan head, Countersunk Heads, etc..)
• Corrosion resistance Zinc coating
• Excellent for workshops !!
• Come in a steel, hinge covered compartment box

Metric Machine Screw Assortment Overview

Metric machine screw assortment contains: M 3x6, 3x10, 3x16, 3x20, 3x30, 4x8, 4x10, 4x16, 4x20, 4x25, 5x10, 5x16, 5x25, 5x30, 6x10, & 6x20 in several head styles. ALL screws are slotted heads. Parts are steel with a zinc finish.

Small Parts Brass Machine Screw, Flat Head, Phillips Drive, 1/4"-20, 1" Length (Pack of 100)

Brass Machine Screw, Flat Head, Phillips Drive, 1/4"-20, 1" Length (Pack of 100) Review

Brass Machine Screw, Flat Head, Phillips Drive, 1/4"-20, 1" Length (Pack of 100) Feature

• Machine Screws are often used with nuts or driven into tapped holes
• Brass is suitable where corrosion resistance is a primary consideration
• Flat head style allows fastener to sit flush to the surface
• Phillips drive is designed to cam out under too much torque
• Coarse threads are better for brittle materials, and will assemble and disassemble more quickly than fine threads

Brass Machine Screw, Flat Head, Phillips Drive, 1/4"-20, 1" Length (Pack of 100) Overview

Machine Screws, also referred to as Machine Bolts, are often used with nuts or driven into tapped holes. They come in a variety of head types and drive styles, but are generally available in smaller sizes.

Brass is rust proof, corrosion resistant and polishes to a rich, golden color. Brass is easily soldered and brazed and accepts plating readily. The typical composition is 70% Copper and 30% Zinc. Strength increases with a higher percentage of Zinc.

Flat head fasteners are designed to fit flush to the surface when used with countersunk holes. Length is measured from the top of the head. The Phillips drive style was originally designed so that the driver would slip out under extreme torque, preventing over-tightening and damage to the fastener or the material.

A threaded fastener's size name includes information about the major external diameter, followed by the threads per inch, which indicates if it is coarse or fine. Coarse threads are better when working with brittle materials; they are sturdier and are easier to thread and unthread compared to fine. Coarse threading also allows for thicker coatings and platings.

Small Parts Stainless Steel Machine Screw, Flat Head, Slotted Drive, #4-40, 9/16" Length (Pack of 100)

Stainless Steel Machine Screw, Flat Head, Slotted Drive, #4-40, 9/16" Length (Pack of 100) Review

Stainless Steel Machine Screw, Flat Head, Slotted Drive, #4-40, 9/16" Length (Pack of 100) Feature

• Machine Screws are often used with nuts or driven into tapped holes
• Stainless Steel is suitable where formability and cost are important considerations
• Flat head style allows fastener to sit flush to the surface
• Driven by a flat-bladed driver
• Coarse threads are better for brittle materials, and will assemble and disassemble more quickly than fine threads

Stainless Steel Machine Screw, Flat Head, Slotted Drive, #4-40, 9/16" Length (Pack of 100) Overview

Machine Screws, also referred to as Machine Bolts, are often used with nuts or driven into tapped holes. They come in a variety of head types and drive styles, but are generally available in smaller sizes.

Stainless steels are used for their corrosion resistance, high-temperature strength, scaling resistance, and low-temperature toughness.  These properties account for their extremely wide use in practically every industry. Austenitic Stainless Steels are alloys of iron and carbon that contain between 16% and 30% Chromium, a maximum of 0.15% carbon, along with Nickel (or Manganese), and other alloying elements.  The chromium, which helps develop a passive surface oxide film, provides corrosion resistance in stainless steels.   Austenitic Stainless Steels are designated by a 3 digit SAE Stainless Steel Grade beginning with the number 3 (e.g. 304, 316).  Another common naming convention for Austenitic Stainless Steels are 18/8, 18/10, 18/0, etc. where the 18 refers to the % of Chromium and 8 to the % of Nickel contained in the material.    

Flat head fasteners are designed to fit flush to the surface when used with countersunk holes. Length is measured from the top of the head. Common applications for slotted screws include woodworking, although the drive style is not designed to be used with power drivers.

A threaded fastener's size name includes information about the major external diameter, followed by the threads per inch, which indicates if it is coarse or fine. Coarse threads are better when working with brittle materials; they are sturdier and are easier to thread and unthread compared to fine. Coarse threading also allows for thicker coatings and platings.

Hillman Fasteners 90230 Hillman Fasteners 100Pk 10-24X1/2 Screw 90230 Machine Screws Round Head

Hillman Fasteners 100Pk 10-24X1/2 Screw 90230 Machine Screws Round Head Review

Hillman Fasteners 100Pk 10-24X1/2 Screw 90230 Machine Screws Round Head Feature

• HILLMAN FASTENERS
• Hillman #90230 100PK 10-24x1/2 Screw

Hillman Fasteners 100Pk 10-24X1/2 Screw 90230 Machine Screws Round Head Overview

100 Pack, 10-24 x 1/2', Zinc Plated, Slotted Round Head, Machine Screw.

Small Parts PEPP-0256-03-C Polypropylene Machine Screw, Pan Head, Phillips Drive, #2-56, 3/16" Length (Pack of 100)

Polypropylene Machine Screw, Pan Head, Phillips Drive, #2-56, 3/16" Length (Pack of 100) Review

Polypropylene Machine Screw, Pan Head, Phillips Drive, #2-56, 3/16" Length (Pack of 100) Feature

• Machine Screws are often used with nuts or driven into tapped holes
• Polypropylene is suitable for applications where resistance to chemicals and water (including steam) is important
• Pan head allows for higher tightening torques
• Phillips drive is designed to cam out under too much torque
• Coarse threads are better for brittle materials, and will assemble and disassemble more quickly than fine threads

Polypropylene Machine Screw, Pan Head, Phillips Drive, #2-56, 3/16" Length (Pack of 100) Overview

Machine Screws, also referred to as Machine Bolts, are often used with nuts or driven into tapped holes. They come in a variety of head types and drive styles, but are generally available in smaller sizes.

Polypropylene is a thermoplastic which is autoclavable (meaning that it can be sterilized using steam), and is non-hydroscopic (it won't absorb water even after extended periods of contact). Polypropylene has excellent chemical resistance to dilute acids, concentrated acids (except oxidizing acids), alkalis, alcohols, detergents, and water. Polypropylene resists aromatic hydrocarbons, chlorinated hydrocarbons, greases, and oils at room temperature. Maximum operating temperature is 212 degrees Fahrenheit. Polypropylene has a low co-efficient of friction and a high dielectric strength (meaning it operates well as an insulator). Polypropylene has approximately half the tensile strength and impact strength of Nylon 6/6. The tensile strength of Polypropylene is 5000 psi (pounds per square inch). Impact Strength, as measured by the Izod impact test method (which measures force required to break material) is 0.5 pounds per foot.

Pan head fasteners have a low, large cylindrical head with a high rounded top edge for higher tightening torques - these fasteners are often recommended to replace older head styles such as round, binding, or truss-head where possible. The Phillips drive style was originally designed so that the driver would slip out under extreme torque, preventing over-tightening and damage to the fastener or the material.

A threaded fastener's size name includes information about the major external diameter, followed by the threads per inch, which indicates if it is coarse or fine. Coarse threads are better when working with brittle materials; they are sturdier and are easier to thread and unthread compared to fine. Coarse threading also allows for thicker coatings and platings.

Small Parts PESF-0440-08-C Polypropylene Machine Screw, Flat Head, Slotted Drive, #4-40, 1/2" Length (Pack of 100)

Polypropylene Machine Screw, Flat Head, Slotted Drive, #4-40, 1/2" Length (Pack of 100) Review

Polypropylene Machine Screw, Flat Head, Slotted Drive, #4-40, 1/2" Length (Pack of 100) Feature

• Machine Screws are often used with nuts or driven into tapped holes
• Polypropylene is suitable for applications where resistance to chemicals and water (including steam) is important
• Flat head style allows fastener to sit flush to the surface
• Driven by a flat-bladed driver
• Coarse threads are better for brittle materials, and will assemble and disassemble more quickly than fine threads

Polypropylene Machine Screw, Flat Head, Slotted Drive, #4-40, 1/2" Length (Pack of 100) Overview

Machine Screws, also referred to as Machine Bolts, are often used with nuts or driven into tapped holes. They come in a variety of head types and drive styles, but are generally available in smaller sizes.

Polypropylene is a thermoplastic which is autoclavable (meaning that it can be sterilized using steam), and is non-hydroscopic (it won't absorb water even after extended periods of contact). Polypropylene has excellent chemical resistance to dilute acids, concentrated acids (except oxidizing acids), alkalis, alcohols, detergents, and water. Polypropylene resists aromatic hydrocarbons, chlorinated hydrocarbons, greases, and oils at room temperature. Maximum operating temperature is 212 degrees Fahrenheit. Polypropylene has a low co-efficient of friction and a high dielectric strength (meaning it operates well as an insulator). Polypropylene has approximately half the tensile strength and impact strength of Nylon 6/6. The tensile strength of Polypropylene is 5000 psi (pounds per square inch). Impact Strength, as measured by the Izod impact test method (which measures force required to break material) is 0.5 pounds per foot.

Flat head fasteners are designed to fit flush to the surface when used with countersunk holes. Length is measured from the top of the head. Common applications for slotted screws include woodworking, although the drive style is not designed to be used with power drivers.

A threaded fastener's size name includes information about the major external diameter, followed by the threads per inch, which indicates if it is coarse or fine. Coarse threads are better when working with brittle materials; they are sturdier and are easier to thread and unthread compared to fine. Coarse threading also allows for thicker coatings and platings.

Monster 8-32 x 1-1/2 Phillips Oval Machine Screw (10 pieces)

8-32 x 1-1/2 Phillips Oval Machine Screw (10 pieces) Review

8-32 x 1-1/2 Phillips Oval Machine Screw (10 pieces) Feature

• Diameter: #8
• Length: 1-1/2"
• Material: Stainless Steel
• Head Style: Oval (Phillips)
• Box of 10

8-32 x 1-1/2 Phillips Oval Machine Screw (10 pieces) Overview

8-32 x 1-1/2 Phillips Oval Machine Screw
Type: Machine Screw

StarTech 15SCREWM3 StarTech M3 x 1/4-Inches Long Screws - 15 Pack 15SCREWM3

StarTech M3 x 1/4-Inches Long Screws - 15 Pack 15SCREWM3 Review

StarTech M3 x 1/4-Inches Long Screws - 15 Pack 15SCREWM3 Feature

• Keep handy M3 threaded screws commonly used to fasten optical drives, and motherboards to the computer chassis
• M3 x 1/4" Long Screws - 15 Pack
• This pack of 15 M3 x 1/4" long screws are handy for building, repairing, and maintaining computer systems.

StarTech M3 x 1/4-Inches Long Screws - 15 Pack 15SCREWM3 Overview

This pack of 15 M3 x 1/4" long screws are handy for building, repairing, and maintaining computer systems.

Antrin Miniature Specialties, Inc. Precision Stainless Steel 303 Machine Screw, Flat Fillister Head, Slotted Drive, NAS, M1-0.25, 0.120" Length (Pack of 25)

Precision Stainless Steel 303 Machine Screw, Flat Fillister Head, Slotted Drive, NAS, M1-0.25, 0.120" Length (Pack of 25) Review

Precision Stainless Steel 303 Machine Screw, Flat Fillister Head, Slotted Drive, NAS, M1-0.25, 0.120" Length (Pack of 25) Feature

• Machined, Precision, Instrument quality machine screws, manufactured to National Aerospace Standards
• Precision, Burr free
• Passivated 303 Stainless Steel Material conforms to AMS-5640 Type 1, ASTM-A-582, MIL-S-7720, QQS763C, QQS764B
• Aerospace Quality
• Medical Quality

Precision Stainless Steel 303 Machine Screw, Flat Fillister Head, Slotted Drive, NAS, M1-0.25, 0.120" Length (Pack of 25) Overview

Machine Screws, also referred to as Machine Bolts, are often used with nuts or driven into tapped holes. They come in a variety of head types and drive styles, but are generally available in smaller sizes.

Stainless steels are used for their corrosion resistance, high-temperature strength, scaling resistance, and low-temperature toughness. These properties account for their extremely wide use in practically every industry. Austenitic Stainless Steels are alloys of iron and carbon that contain between 16% and 30% Chromium, a maximum of 0.15% carbon, along with Nickel (or Manganese), and other alloying elements. The chromium, which helps develop a passive surface oxide film, provides corrosion resistance in stainless steels. Austenitic Stainless Steels are designated by a 3 digit SAE Stainless Steel Grade beginning with the number 3 (e.g. 304, 316).

Stainless Steel 303 contains 0.15% carbon, along with traces of sulfur and phosphorus which makes this a free machining alloy. Free machining refers to the ability to cut and finish the materials without heavy wear on the machining tools. Tensile Strength is 35000 psi (pounds per square inch). Passivation helps prevent corrosion in certain stainless steels by removing surface impurities that can be caused by machining or forming processes. These impurities block the normally occurring formation of a protective oxide coating on the steel.

Fillister head for high torque and good hold-down strength

A threaded fastener's size name includes information about the major external diameter (in millimeters), followed by the thread pitch (millimeters per thread), which indicates if it is coarse or fine. Fine threads are preferable when working with harder materials or when threading into a thin material. They are also stronger in tension than coarse threads, and generally provide higher shear strengths.

Small Parts Brass Machine Screw, Flat Head, Slotted Drive, #6-32, 1" Length (Pack of 100)

Brass Machine Screw, Flat Head, Slotted Drive, #6-32, 1" Length (Pack of 100) Review

Brass Machine Screw, Flat Head, Slotted Drive, #6-32, 1" Length (Pack of 100) Feature

• Machine Screws are often used with nuts or driven into tapped holes
• Brass is suitable where corrosion resistance is a primary consideration
• Flat head style allows fastener to sit flush to the surface
• Driven by a flat-bladed driver
• Coarse threads are better for brittle materials, and will assemble and disassemble more quickly than fine threads

Brass Machine Screw, Flat Head, Slotted Drive, #6-32, 1" Length (Pack of 100) Overview

Machine Screws, also referred to as Machine Bolts, are often used with nuts or driven into tapped holes. They come in a variety of head types and drive styles, but are generally available in smaller sizes.

Brass is rust proof, corrosion resistant and polishes to a rich, golden color. Brass is easily soldered and brazed and accepts plating readily. The typical composition is 70% Copper and 30% Zinc. Strength increases with a higher percentage of Zinc.

Flat head fasteners are designed to fit flush to the surface when used with countersunk holes. Length is measured from the top of the head. Common applications for slotted screws include woodworking, although the drive style is not designed to be used with power drivers.

A threaded fastener's size name includes information about the major external diameter, followed by the threads per inch, which indicates if it is coarse or fine. Coarse threads are better when working with brittle materials; they are sturdier and are easier to thread and unthread compared to fine. Coarse threading also allows for thicker coatings and platings.

FastenMaster FMGUT007-25W FastenMaster FMGUT007-25W 7 Inch Gutter Screws, White, 25-Pack

FastenMaster FMGUT007-25W 7 Inch Gutter Screws, White, 25-Pack Review

FastenMaster FMGUT007-25W 7 Inch Gutter Screws, White, 25-Pack Feature

• #3 Square drive helps make hard-to-reach installations simple
• Guaranteed for life of the project against corrosion
• Head-painted white/brown to match most gutter systems
• Ferrules are metal not plastic which eliminates cracking
• Free driver bit included

FastenMaster FMGUT007-25W 7 Inch Gutter Screws, White, 25-Pack Overview

Replaces old gutter spikes. Has a diameter that is larger than gutter spikes therefore it grabs right into the old spike hole offering unmatched holding power and a watertight fit. Corrosion resistant. Square drive. Blister pack includes complete set: Ten 7'' screws, ten 5'' ferrules, and 1 driver bit.

Small Parts 010440WF100 Nylon 6/6 Machine Screw, Fillister Head, Phillips Drive, #4-40, 1" Length (Pack of 100)

Nylon 6/6 Machine Screw, Fillister Head, Phillips Drive, #4-40, 1" Length (Pack of 100) Review

Nylon 6/6 Machine Screw, Fillister Head, Phillips Drive, #4-40, 1" Length (Pack of 100) Feature

• Machine Screws are often used with nuts or driven into tapped holes
• Nylon 6/6 is suitable where non-conductivity, corrosion resistance, and cost are important considerations
• Fillister head for high torque and good hold-down strength
• Phillips drive is designed to cam out under too much torque
• Coarse threads are better for brittle materials, and will assemble and disassemble more quickly than fine threads

Nylon 6/6 Machine Screw, Fillister Head, Phillips Drive, #4-40, 1" Length (Pack of 100) Overview

Machine Screws, also referred to as Machine Bolts, are often used with nuts or driven into tapped holes. They come in a variety of head types and drive styles, but are generally available in smaller sizes.

Nylon 6/6 is a general purpose thermoplastic with outstanding resistance to organic chemicals, acids and alkalis. Nylon wears well against other surfaces; it is readily machinable and may be milled, turned and cut with conventional machine tools. It does exhibit some dimensional swelling in wet applications which should be taken into account with its use. Tensile strength of this material is 12,000 psi (pounds per square inch).

Fillister head fasteners are considered an improvement over round head equivalents - the smaller head creates more downward pressure for a given torque level and the thicker head plus deeper drive slot allows higher torque levels to be generated. The Phillips drive style was originally designed so that the driver would slip out under extreme torque, preventing over-tightening and damage to the fastener or the material.

A threaded fastener's size name includes information about the major external diameter, followed by the threads per inch, which indicates if it is coarse or fine. Coarse threads are better when working with brittle materials; they are sturdier and are easier to thread and unthread compared to fine. Coarse threading also allows for thicker coatings and platings.