Small Parts Brass Machine Screw, Flat Head, Phillips Drive, 1/4"-20, 1" Length (Pack of 100)

Brass Machine Screw, Flat Head, Phillips Drive, 1/4"-20, 1" Length (Pack of 100) Review

Brass Machine Screw, Flat Head, Phillips Drive, 1/4"-20, 1" Length (Pack of 100) Feature

• Machine Screws are often used with nuts or driven into tapped holes
• Brass is suitable where corrosion resistance is a primary consideration
• Flat head style allows fastener to sit flush to the surface
• Phillips drive is designed to cam out under too much torque
• Coarse threads are better for brittle materials, and will assemble and disassemble more quickly than fine threads

Brass Machine Screw, Flat Head, Phillips Drive, 1/4"-20, 1" Length (Pack of 100) Overview

Machine Screws, also referred to as Machine Bolts, are often used with nuts or driven into tapped holes. They come in a variety of head types and drive styles, but are generally available in smaller sizes.

Brass is rust proof, corrosion resistant and polishes to a rich, golden color. Brass is easily soldered and brazed and accepts plating readily. The typical composition is 70% Copper and 30% Zinc. Strength increases with a higher percentage of Zinc.

Flat head fasteners are designed to fit flush to the surface when used with countersunk holes. Length is measured from the top of the head. The Phillips drive style was originally designed so that the driver would slip out under extreme torque, preventing over-tightening and damage to the fastener or the material.

A threaded fastener's size name includes information about the major external diameter, followed by the threads per inch, which indicates if it is coarse or fine. Coarse threads are better when working with brittle materials; they are sturdier and are easier to thread and unthread compared to fine. Coarse threading also allows for thicker coatings and platings.

Small Parts PEPP-0256-03-C Polypropylene Machine Screw, Pan Head, Phillips Drive, #2-56, 3/16" Length (Pack of 100)

Polypropylene Machine Screw, Pan Head, Phillips Drive, #2-56, 3/16" Length (Pack of 100) Review

Polypropylene Machine Screw, Pan Head, Phillips Drive, #2-56, 3/16" Length (Pack of 100) Feature

• Machine Screws are often used with nuts or driven into tapped holes
• Polypropylene is suitable for applications where resistance to chemicals and water (including steam) is important
• Pan head allows for higher tightening torques
• Phillips drive is designed to cam out under too much torque
• Coarse threads are better for brittle materials, and will assemble and disassemble more quickly than fine threads

Polypropylene Machine Screw, Pan Head, Phillips Drive, #2-56, 3/16" Length (Pack of 100) Overview

Machine Screws, also referred to as Machine Bolts, are often used with nuts or driven into tapped holes. They come in a variety of head types and drive styles, but are generally available in smaller sizes.

Polypropylene is a thermoplastic which is autoclavable (meaning that it can be sterilized using steam), and is non-hydroscopic (it won't absorb water even after extended periods of contact). Polypropylene has excellent chemical resistance to dilute acids, concentrated acids (except oxidizing acids), alkalis, alcohols, detergents, and water. Polypropylene resists aromatic hydrocarbons, chlorinated hydrocarbons, greases, and oils at room temperature. Maximum operating temperature is 212 degrees Fahrenheit. Polypropylene has a low co-efficient of friction and a high dielectric strength (meaning it operates well as an insulator). Polypropylene has approximately half the tensile strength and impact strength of Nylon 6/6. The tensile strength of Polypropylene is 5000 psi (pounds per square inch). Impact Strength, as measured by the Izod impact test method (which measures force required to break material) is 0.5 pounds per foot.

Pan head fasteners have a low, large cylindrical head with a high rounded top edge for higher tightening torques - these fasteners are often recommended to replace older head styles such as round, binding, or truss-head where possible. The Phillips drive style was originally designed so that the driver would slip out under extreme torque, preventing over-tightening and damage to the fastener or the material.

A threaded fastener's size name includes information about the major external diameter, followed by the threads per inch, which indicates if it is coarse or fine. Coarse threads are better when working with brittle materials; they are sturdier and are easier to thread and unthread compared to fine. Coarse threading also allows for thicker coatings and platings.

Monster 8-32 x 1-1/2 Phillips Oval Machine Screw (10 pieces)

8-32 x 1-1/2 Phillips Oval Machine Screw (10 pieces) Review

8-32 x 1-1/2 Phillips Oval Machine Screw (10 pieces) Feature

• Diameter: #8
• Length: 1-1/2"
• Material: Stainless Steel
• Head Style: Oval (Phillips)
• Box of 10

8-32 x 1-1/2 Phillips Oval Machine Screw (10 pieces) Overview

8-32 x 1-1/2 Phillips Oval Machine Screw
Type: Machine Screw

Small Parts 010440WF100 Nylon 6/6 Machine Screw, Fillister Head, Phillips Drive, #4-40, 1" Length (Pack of 100)

Nylon 6/6 Machine Screw, Fillister Head, Phillips Drive, #4-40, 1" Length (Pack of 100) Review

Nylon 6/6 Machine Screw, Fillister Head, Phillips Drive, #4-40, 1" Length (Pack of 100) Feature

• Machine Screws are often used with nuts or driven into tapped holes
• Nylon 6/6 is suitable where non-conductivity, corrosion resistance, and cost are important considerations
• Fillister head for high torque and good hold-down strength
• Phillips drive is designed to cam out under too much torque
• Coarse threads are better for brittle materials, and will assemble and disassemble more quickly than fine threads

Nylon 6/6 Machine Screw, Fillister Head, Phillips Drive, #4-40, 1" Length (Pack of 100) Overview

Machine Screws, also referred to as Machine Bolts, are often used with nuts or driven into tapped holes. They come in a variety of head types and drive styles, but are generally available in smaller sizes.

Nylon 6/6 is a general purpose thermoplastic with outstanding resistance to organic chemicals, acids and alkalis. Nylon wears well against other surfaces; it is readily machinable and may be milled, turned and cut with conventional machine tools. It does exhibit some dimensional swelling in wet applications which should be taken into account with its use. Tensile strength of this material is 12,000 psi (pounds per square inch).

Fillister head fasteners are considered an improvement over round head equivalents - the smaller head creates more downward pressure for a given torque level and the thicker head plus deeper drive slot allows higher torque levels to be generated. The Phillips drive style was originally designed so that the driver would slip out under extreme torque, preventing over-tightening and damage to the fastener or the material.

A threaded fastener's size name includes information about the major external diameter, followed by the threads per inch, which indicates if it is coarse or fine. Coarse threads are better when working with brittle materials; they are sturdier and are easier to thread and unthread compared to fine. Coarse threading also allows for thicker coatings and platings.

Monster 1/4-20 x 1/2 Black Phillips Machine Screw (20 pieces)

1/4-20 x 1/2 Black Phillips Machine Screw (20 pieces) Review

1/4-20 x 1/2 Black Phillips Machine Screw (20 pieces) Feature

• Diameter: 1/4"
• Length: 1/2"
• Driver Type: Phillips
• Thread Type: 20 (Coarse)
• Box of 20

1/4-20 x 1/2 Black Phillips Machine Screw (20 pieces) Overview

1/4-20 x 1/2 Black Phillips Machine Screw

HANDIMAN MARINE Stainless Steel Phillips Oval Head Machine Screw 10-24 x 1-1/2, Pack of 10

Stainless Steel Phillips Oval Head Machine Screw 10-24 x 1-1/2, Pack of 10 Review

Stainless Steel Phillips Oval Head Machine Screw 10-24 x 1-1/2, Pack of 10 Feature

• Sold 10 per pack
• HANDIMAN MARINE COMPANY 696

Stainless Steel Phillips Oval Head Machine Screw 10-24 x 1-1/2, Pack of 10 Overview

3 per Card

Auveco 8-32X3/4 Phillips Pan Head Machine Screw (100 count)

8-32X3/4 Phillips Pan Head Machine Screw (100 count) Review

8-32X3/4 Phillips Pan Head Machine Screw (100 count) Overview

8-32X3/4 Phillips Pan Head Machine Screw

Auveco 6-32X1 Phillips Pan Head Machine Screw (100 count)

6-32X1 Phillips Pan Head Machine Screw (100 count) Review

6-32X1 Phillips Pan Head Machine Screw (100 count) Overview

6-32X1 Phillips Pan Head Machine Screw

Unknown M2-0.4 X 4 Metric Machine Screws Phillips / Pan Head / Steel / Zinc / DIN7985A / 4,000 Pc. Carton

M2-0.4 X 4 Metric Machine Screws Phillips / Pan Head / Steel / Zinc / DIN7985A / 4,000 Pc. Carton Review

M2-0.4 X 4 Metric Machine Screws Phillips / Pan Head / Steel / Zinc / DIN7985A / 4,000 Pc. Carton Feature

• M2-0.4 X 4 Metric Machine Screws
• Pan Head
• Zinc Plated
• DIN7985A

M2-0.4 X 4 Metric Machine Screws Phillips / Pan Head / Steel / Zinc / DIN7985A / 4,000 Pc. Carton Overview

M2-0.4 X 4 Metric Machine Screws Phillips / Pan Head / Steel / Zinc / DIN7985A

Auveco 8-32X1 1/2 Phillips Pan Head Machine Screw (100 count)

8-32X1 1/2 Phillips Pan Head Machine Screw (100 count) Review

8-32X1 1/2 Phillips Pan Head Machine Screw (100 count) Overview

8-32X1 1/2 Phillips Pan Head Machine Screw

Small Parts Zinc Plated Steel Machine Screw, Pan Head, Phillips Drive, M3-0.5, 40mm Length (Pack of 100)

Zinc Plated Steel Machine Screw, Pan Head, Phillips Drive, M3-0.5, 40mm Length (Pack of 100) Review

Zinc Plated Steel Machine Screw, Pan Head, Phillips Drive, M3-0.5, 40mm Length (Pack of 100) Feature

• Machine Screws are often used with nuts or driven into tapped holes
• Zinc Plated Steel fasteners are suitable where strength and corrosion resistance are primary considerations
• Pan head allows for higher tightening torques
• Phillips drive is designed to cam out under too much torque
• Coarse threads are better for brittle materials, and will assemble and disassemble more quickly than fine threads

Zinc Plated Steel Machine Screw, Pan Head, Phillips Drive, M3-0.5, 40mm Length (Pack of 100) Overview

Machine Screws, also referred to as Machine Bolts, are often used with nuts or driven into tapped holes. They come in a variety of head types and drive styles, but are generally available in smaller sizes.

Steels are designated by a 4 number SAE Steel grade.  The first two digits indicate the primary materials used to form the steel.  The last 2 digits identify the percentage of carbon for the alloy (in hundredths).  The steel used in these fasteners has a tensile strength ranging from 100,000 to 150,000 psi (pounds per square inch).  Zinc Plating helps to prevent corrosion.

Pan head fasteners have a low, large cylindrical head with a high rounded top edge for higher tightening torques - these fasteners are often recommended to replace older head styles such as round, binding, or truss-head where possible. The Phillips drive style was originally designed so that the driver would slip out under extreme torque, preventing over-tightening and damage to the fastener or the material.

A threaded fastener's size name includes information about the major external diameter (in millimeters), followed by the thread pitch (millimeters per thread), which indicates if it is coarse or fine. Coarse threads are better when working with brittle materials; they are sturdier and are easier to thread and unthread compared to fine. Coarse threading also allows for thicker coatings and platings.

Small Parts Zinc Plated Steel Machine Screw, Pan Head, Phillips Drive, #8-32, 1-1/4" Length (Pack of 100)

Zinc Plated Steel Machine Screw, Pan Head, Phillips Drive, #8-32, 1-1/4" Length (Pack of 100) Review

Zinc Plated Steel Machine Screw, Pan Head, Phillips Drive, #8-32, 1-1/4" Length (Pack of 100) Feature

• Machine Screws are often used with nuts or driven into tapped holes
• Zinc Plated Steel fasteners are suitable where strength and corrosion resistance are primary considerations
• Pan head allows for higher tightening torques
• Phillips drive is designed to cam out under too much torque
• Coarse threads are better for brittle materials, and will assemble and disassemble more quickly than fine threads

Zinc Plated Steel Machine Screw, Pan Head, Phillips Drive, #8-32, 1-1/4" Length (Pack of 100) Overview

Machine Screws, also referred to as Machine Bolts, are often used with nuts or driven into tapped holes. They come in a variety of head types and drive styles, but are generally available in smaller sizes.

Steels are designated by a 4 number SAE Steel grade.  The first two digits indicate the primary materials used to form the steel.  The last 2 digits identify the percentage of carbon for the alloy (in hundredths).  The steel used in these fasteners has a tensile strength ranging from 100,000 to 150,000 psi (pounds per square inch).  Zinc Plating helps to prevent corrosion.

Pan head fasteners have a low, large cylindrical head with a high rounded top edge for higher tightening torques - these fasteners are often recommended to replace older head styles such as round, binding, or truss-head where possible. The Phillips drive style was originally designed so that the driver would slip out under extreme torque, preventing over-tightening and damage to the fastener or the material.

A threaded fastener's size name includes information about the major external diameter, followed by the threads per inch, which indicates if it is coarse or fine. Coarse threads are better when working with brittle materials; they are sturdier and are easier to thread and unthread compared to fine. Coarse threading also allows for thicker coatings and platings.

100 M4-.7 X 10mm Phillips Pan Head Metric Machine Screw

100 M4-.7 X 10mm Phillips Pan Head Metric Machine Screw Review

100 M4-.7 X 10mm Phillips Pan Head Metric Machine Screw Overview

4mm-.70 x 10mm

Phillips Pan Head Metric Machine Screws

Zinc

DIN 7985

100 Per Package